Upsite 10161 Modular Containment: Rack Top Vertical Baffl User Manual download pdf

Rack Top Bafﬂe Assembly Instructions

Covers Part Numbers:

10160 and 10161

Installation Guide

The 2-pak carton contains

components to assemble

(2) AisleLok

Rack Top Bafﬂes includes:

(2) Clear Plastic Panel Assemblies

(4) Magnet Tails Assemblies

(2) Adjustment Clips

SAFETY REQUIREMENTS

The AisleLok

Rack Top Bafﬂe Assembly attaches to the tops of IT rack cabinets using strong rare earth magnets. Use extreme

caution when handling the powerful magnets. Make sure to keep ﬁngers clear of the contact area between the magnets and

the metal mounting surface.

For proper mounting, the AisleLok

Rack Top Bafﬂe magnets must make direct contact with a steel or other ferrous metal

surface, e.g. rack top panel, rack frame, etc. Any obstruction that prevents the magnets from making direct metal contact will

reduce the holding force of the magnets and may cause the AisleLok

Rack Top Bafﬂe to fall. Installation will likely require the

use of a ladder or moveable stairs, caution should be exercised when climbing up and down ladders/stairs. When standing on

the ladder/stairs, be careful of overhead lighting or cabling.

Installation Instructions:

AisleLok

Rack Top Bafﬂe Assembly

1. Determine the best attachment position for the Magnet Tails

The tail assembly can be mounted in a number of different

positions. The outer most positions often work best on many

cabinets. Before attaching the tails to the extrusion base, make

sure to inspect the top surface of the cabinet the AisleLok

Rack

Top Bafﬂe Assembly will be mounted to. Many cabinets have cable

cutouts, or other potential interference issues that must be avoided.

2. Attach the Tail Assemblies to the Extrusion

The magnet comes preassembled to the magnet tail with a

thumbscrew. The magnet position is adjustable on the tail,

but movement of the magnet is rarely needed.

a. With the most optimum mounting location identiﬁed, remove

the thumbscrew from the tail assembly, which is NOT attached

to the magnet.

b. Position the tail assembly beneath the desired hole on the

extrusion base ﬂange. Insert the thumb screw thru the required

hole on the extrusion base and thread into the receiving

threaded hole on the tail assembly. Tighten by hand. Repeat for

the 2nd tail assembly.

1 2 3

Installation Guide 1

Summary of Contents

Page 1 - Installation Guide

Rack Top Bafﬂe Assembly InstructionsCovers Part Numbers: 10160 and 10161Installation GuideThe 2-pak carton contains components to assemble (2) Aisl

Page 2

Installation Guide3. Position the AisleLok® Rack Top Bafﬂe Assembly on top of the racka. To simplify full front to back and side to side adjustabili

Page 3

Comments to this Manuals

No comments

Upsite 10161 Modular Containment: Rack Top Vertical Baffl User Manual

Browse online or download User Manual for For Home Upsite 10161 Modular Containment: Rack Top Vertical Baffl. Upsite 10161 Modular Containment: Rack Top Vertical Baffle User Manual

Summary of Contents

Comments to this Manuals